SHENZHEN ZD TECH CO., LTD
Take you into 5G world
Add to Cart
RF WCDMA ICS Repeater 20W N-Female IP65 Mobile
Description of ICS
The ICS function using DSP (Digital Signal Processing) recognizes each feedback signal and creates an equal and opposite signal in real-time.
The ICS system is able to effectively eliminate all multi-path signals including direct feedback from the coverage antenna, indirect feedback from predictable obstacles and can now even cancel indirect feedback from unpredictable obstacles despite changes in feedback signal timing and amplitude.
The Long Range Cell Amplifier Outdoor GSM 850MHz 900MHz 1800MHz 1900MHz 20W 43dBm ICS Repeater is designed to provide a more cost-effective solution than adding a new Base Transceiver Station (BTS) to improve signal coverage of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low-power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
|
Parameter
|
Specification
|
|
Frequency Range
|
Uplink: 1950~1980MHz; Downlink: 2140~2170MHz
|
|
Carrier Number
|
4 carriers channel selective
|
|
Interference Cancellation Range
|
>= 25dB
|
|
EVM
|
<= 12.5%
|
|
PCDE
|
<= -35dB
|
|
Maximum Gain
|
Uplink: 95dB; Downlink: 100dB
|
|
Gain Adjustment Range
|
30dB; 1dB step
|
|
Ripple in Band
|
<= 2.0dB/3.84MHz
|
|
Maximum Output Power
|
43dBm
|
|
ACLR
|
>= 45dBc@5MHz; >= 50dBc@10MHz
|
|
IMD
|
<= -36dBc
|
|
Spurious Emission
|
<= -36dBm/100kHz, 9kHz~1GHz
<= -30dBm/1MHz, 1GHz~12.75GHz
|
|
Noise Figure
|
<= 5dB
|
|
Time Delay
|
<= 10μs
|
|
VSWR
|
<= 1.5
|
|
Maximum Input Power before damage
|
10dBm
|
|
Network Management System
|
Available
|
|
Local Monitoring
|
RS-232
|
|
Remote Monitoring
|
Build-in GSM900/1800 wireless Modem
|
|
Power Supply
|
AC155V~265V / 50Hz±5Hz
|
|
Working Temperature
|
-40 ~ +55 ℃
|
|
Relevant Humidity
|
<= 95%
|
|
Protection Level
|
IP65
|
|
RF Connector
|
N-F / 50 ohm
|
|
Size
|
450×420×164mm
|
Our company introduction:
1. We have our own R&D team and have 17 R&D engineers,with independent R&D lab,can quickly provide upmarket product customerization services for customers.
2. We have 6 passive components production lines,150 employees,adopt advanced automatic screw machine,production capacity can up to 5000PCS/ per day.
3. Owning full set of available testing equipment to guarantee the quality of products.
4. Adopt advanced ATE testing system,owning full frequency of Intermodulation test equipment,perfect ERP management system and blameless process quality control system to promise the high qualification rate.
5. Our factory have more than 8 years production experience on antenna and passive components,have a rich product category and high cost-effective,is the leader in antenna and the passive communications industry in China.