SHENZHEN ZD TECH CO., LTD
Take you into 5G world
Add to Cart
Model: ZD-CN-NF-CF12
N Female connector for 1/2’’ flexible RF cable
N Connector is a threaded RF Connector used for linking with coaxial cable. It has both 50 Ohm and standard 75 Ohm impedances. N Connectors Applications Antennas, Base Stations, Broadcast, WLAN, Cable Assemblies, Cellular, Components test & Instrumentation equipments, Microwave Radio, MIL-Aero PCS, Radar, Radio equipments, Satcom, Surge Protection.
With the exception of the inner contacts, the interface dimensions of the 75 ohm connector have been traditionally identical to that of the 50 ohm connector. It has thus been possible unintentionally to cross couple connectors with the following effects:
(A) 75 ohm male pin - 50 ohm female pin: open circuit inner contact.
(B) 50 ohm male pin - 75 ohm female pin: mechanical destruction of 75 ohm inner socket contact.
Note: These characteristics are typical and may not apply to all connectors.
• Cable Assembly
• Antenna
• W-LAN
• Radio
• GPS
• Base Station
• Aero
• Radar
• PCS
• Surge Protection
• Telecom
• Instrumentation
• Broadcast
• Satcom
• Instrumentation
•N Female Connector
•50 Ohms
Electrical Specifications
| Material and Plating | |
| Center contact | Brass / Silver Plating |
| Insulator | PTFE |
| Body & Outer Conductor | Brass / alloy plated with tri-alloy |
| Gasket | Silicon Rubber |
| Electrical Characteristics | |
| Characteristics Impedance | 50 Ohm |
| Frequency Range | DC~3 GHz |
| Insulation Resistance | ≥5000MΩ |
| Dielectric Strength | ≥2500 V rms |
| Center contact resistance | ≤1.0 mΩ |
| Outer contact resistance | ≤1.0 mΩ |
| Insertion Loss | ≤0.05dB@3GHz |
| VSWR | ≤1.08@-3.0GHz |
| Temperature range | -40~85℃ |
| PIM dBc(2×20W) | ≤-155 dBc(2×20W) |
| Waterproof | IP67 |