2 Meter 1/2" jumper cable with 4.3-10 female to 4.3-10 female Connector
It is used for transmitting and receiving as the main feeder or sub-feeder in mobile communication systerm. It can also be used in other elictronic decives to transmitting high-frequency signal as low-loss transmission line.
| 1.1 Connector Materials and Plating |
| Inner conductor: | Bronze, plated with silver,plating thickness ≥0.003mm |
| Outer conductor: | Brass, plated with ternary alloy,plating thickness≥0.003mm |
| Fastener: Brass: | Insulation |
| dielectric: | PTFE |
| 1.2 Connector Electrical Spec |
| Characteristics impedance: | 50Ω |
| Frequency range: | DC-6GHz |
| VSWR: | ≤1.15 (DC-3GHz) |
| Insulator resistance: | ≥5GΩ |
| Center conductor resistance: | ≤1.0mΩ; Outer conductor resistance: ≤0.2mΩ |
| Test voltage (at sea level): | ≥2500 V rms |
| PIM(IM3): | ≤-160dBc@2x43dBm |
| 1.3 Connector Mechanical Feature |
| Mating cycles: | ≥500 cycles |
| Coupling nut retention: | 500N |
| Recommended torque: | 5 N.m |
| Termination cable retention: | ≥300N |
2. RF coaxial cable: 1/2” Super Flexible RF Cable
| 2.1 Materials |
| Inner conductor: | aluminum wire covered with copper (Φ3.55mm±0.04) |
| Insulation dielectric: | polyethylene foamed PE (Φ9.2mm±0.20) |
| Outer conductor: | Helically corrugated copper (Φ12.0mm±0.2) |
| Cable jacket: | PE or fire retardant PE (Φ13.60mm±0.20) |
| 2.2 Feature | |
| Characteristics impedance: | 50Ω |
| Capacitance: | 82 PF/m |
| Propagation velocity: | 83% |
| Min. single bending radius: | 50mm |
| Tensile strength: | 800N |
| Insulation resistance: | ≥5GΩ |
| Shielding attenuation: | ≥120dB |
| VSWR: | ≤1.15 (0.01-3GHz) |
| 3.1 Electrical feature | |
| Frequency Band: | 700-2700MHz |
| Characteristics Impedance: | 50Ω±1 |
| Operating Voltage: | 1500V |
| VSWR: | ≤1.1 (DC-3GHz), ≤1.15 (3-6GHz) |
| Insulation voltage: | ≥2500V |
| Insulation resistance: | ≥5GΩ (500V DC) |
| PIM(IM3): | ≤-160dBc@2x20W, manufacturing 100% QC test 900MHz, 1800MHz. |
