SHENZHEN ZD TECH CO., LTD
Take you into 5G world
Add to Cart
Support multi operators' network stimultaneously
Support multi sub bands, band selective, channel selective, band tunable, hybrid( band + channel selective)
High isolation, out of band rejection
Support future bandwidth re-allocation, easy for refarming
IP65, waterproof, dust proof
Adjustable output power and gain, flexible and easy engineering design
Super linear power amplifier, excellent three-level inter-modulation index
Application
| Item | Up Link | Down Link | |
| Frequency range | 824-849 MHz | ||
| Max. Output Power | 33/37dBm | 33/37/40/43 dBm | |
| Max. Gain | 100 ±3 dB | 105±3 dB | |
| Gain step | 1 db |
| |
| Gain adjust scope | 31 dB |
| |
| Channel selective | 12 |
| |
| ALC | f0<=2 dB | f0<=2 dB | |
| Passband Ripple | <= 3.5 dB | <= 3.5 dB | |
| Frequency Error | ±5X10-8 | ±5X10-8 | |
| Gain Adjustment Range | >= 30dB | >=30dB | |
| Gain Adjustment Error | ≤1.5 | ≤1.5 | |
| Gain Adjustment Step | 1 dB / Step | 1 dB / Step | |
| Noise Figure | <=5 dB | <=5 dB | |
| Third-order inter-modulation distortion | In Work band | <=-36dBc/30KHz | |
| Out band (offset work band 2.5MHZ) | 9KHz-1GHz: <=-36dBm/30KHz | ||
| 1-12.75GHz: <=-30dBm/30KHz | |||
| Input RF scope | Pinmax+5~-85dBm | ||
| System Time Delay | < 20 us | ||
| VSWR | < 1.5:1 | ||
| In/Output Impedance (Ω) | 50W | ||
| In/Output Connector | N-F | ||
| Working Voltage | DC -48V AC 220V (AC 190~240V@50/60Hz) 100W@37dBm output 150W@43dBm output 200W@46dBm output | ||
| Requirement for technical safety | In accordance with relevant regulations in the standard of GB4793-84 | ||
| Requirement for electromagnetic compatibility | In accordance with relevant regulations in the standard of GB6833-87 | ||
| Environmental Conditions | Temperature: -25 Co ~+55Co Humidity: ≤95% Air pressure: 70~106kPa IP65 | ||
| Dimension(W x D x H) | 450×315×170 mm | ||
| Weight | About 23 Kg | ||
| Management and control | Local computer through Ethernet Remote management via GSM MODEM | ||
| * detail tech parameter should reference to Test Report accomplished with its repeater | |||